Click image to view full size image
A-VS1TP series current mode voltage sensor is a device based on the principle of the hall effect, with a galvanic isolation between primary and secondary circuit. It provides accurate electronic measurement of DC AC or pulsed currents.
·Variable speed drives
·Welding machine
·Battery supplied applications
·Uninterruptible Power Supplies (UPS)
·Electrochemical
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation: 1:OV 2:+24V 3:IOUT
4:+V 5:NC 6:-V
1. When the voltage will be measured goes through a sensor, the current will be measured at the output end.(Note: The false wiring may result in the damage of the sensor)
2. Custom design in the different rated input current and the output current are available.
·UL94-V0.
·EN60947-1:2004
·IEC60950-1:2001
·EN50178:1998
·SJ 20790-2000
| Electrical data (Ta=25ºC±5ºC,RL=2KΩ,CL=10000PF) |
| Type | A-VS1TP- 100V |
A-VS1TP- 220V |
A-VS1TP- 380V |
A-VS1TP- 500V |
A-VS1TP- 800V |
Unit |
| Rated voltage(Vpn AC) | ±100 | ±220 | ±380 | ±500 | ±800 | V |
| Measure range(Vp AC) | 0-±150 | 0-±330 | 0-±570 | 0-±750 | 0-±1000 | V |
| Rated output | @Vp=±Vpn ±20±1% | mA | ||||
| Turns ratio(Np/Ns) | 3333:1000 | T | ||||
| Measure resister | 54~580 | Ω | ||||
| Supply voltage | +24 | V | ||||
| Power Consumption | ≤20+IpX(Np/Ns) | mA | ||||
| Offset current | @Vp=0 ±0.2 | mA | ||||
| Offset drift | @ -40~+85ºC ≤±0.5 | mA /ºC | ||||
| Linearity | @Vp=0-±Vpn ≤0.2 | %FS | ||||
| Response time | ≤20 | ms | ||||
| Galvanic isolation | @ 50HZ,AC,1min 2.5 | KV | ||||
| Applications |
·Variable speed drives
·Welding machine
·Battery supplied applications
·Uninterruptible Power Supplies (UPS)
·Electrochemical
Remarks:
1. All dimensions are in mm.
2. General tolerance ±1mm.
3. Elucidation: 1:OV 2:+24V 3:IOUT
4:+V 5:NC 6:-V
| Directions for use |
1. When the voltage will be measured goes through a sensor, the current will be measured at the output end.(Note: The false wiring may result in the damage of the sensor)
2. Custom design in the different rated input current and the output current are available.
| Standards |
·UL94-V0.
·EN60947-1:2004
·IEC60950-1:2001
·EN50178:1998
·SJ 20790-2000
| General date |
| Value | Unit | |
| Operating temperature(TA) | -40 to +85 | ºC |
| Storage temperature(TS) | -40 to +125 | ºC |
| Mass(approx) (M) | 43 | g |